典型應用場景
乳制品行業:牛奶脫脂(分離稀奶油與脫脂乳)、乳清蛋白濃縮、鮮牛乳澄清等 。 ?
植物油行業:毛油脫膠、磷脂分離(殘磷量≤10ppm)、棕櫚油凈化等 。 ?
飲料行業:果汁澄清(濁度≤20NTU)、啤酒凈化、植物蛋白提取等 。 ?
化工與環保:含油廢水處理(出水含油≤15mg/L)、鈦白粉漿料分級、高嶺土精制等 。 ?
分離原理
通過高速旋轉的轉鼓產生離心力,使密度差異的液相分層(如稀奶油向中心移動,脫脂乳向外圍移動),固相顆粒沉積于轉鼓內壁定期排出 。 ?
特殊功能
噴嘴排渣:連續操作,沉渣濃度可提高5-20倍,處理量達300m3/h 。 ?
活門排渣:間歇排渣,無需停機 。 ?

Equipment technical parameters (main distinguishing parameter identification background color)
| project | Jiangxi Meifei Environmental Protection Technology Co., Ltd | ||
1 | Product model: | MFR-30P | MFR-40P | MFR-40G |
2 | Product Name/Brand: | Fluid disc separator/MFR | ||
3 | Size: | 1015mm * 622mm * 943mm | ||
4 | Weight: | ≤ 320KG | ||
5 | Working power supply: | Three phase four wire system 380V | ||
6 | Frequency/rated power: | 50HZ/3KW | ||
7 | Usage environment: | 10-70 | -10-70 ℃ | -20-80 ℃ |
8 | Environmental humidity: |
| ≤ 95% |
|
9 | Centrifugal cylinder speed: | 8000 r/min | 8000 r/min | 10000 r/min |
10 | Dehydration efficiency: | 0 | 96.10% | 99.80% |
11 | Dehydration method: | Micro drainage of the sewage box | Automatic continuous drainage | High speed automatic continuous drainage |
12 | NAS level: | 6-9 levels | Level 5-8 | 4-7 levels |
13 | Imported oil pressure: | Vacuum degree ≤ 0.05Mpa | ||
14 | Maximum output pressure: | ≤ 0.40Mpa | ||
15 | Minimum working pressure: | ≥ 0.15Mpa | ||
16 | Pollutant capacity: | 3Kg | ||
17 | Self suction height: | ≤ 8m | ||
18 | Traffic: | 30-45L/min | 36-50L/min | 36-60L/min (adjustable) |
19 | Oil viscosity range: | 32-320 # oil products are applicable | ||
20 | Moisture content: | / | ≤ 500PPM | ≤ 200PPM |
21 | Gas content: | No free gas | ||
22 | Applicable fuel tank volume | Drainage and exhaust oil tank fully applicable | ||
23 | Protection system: | Phase sequence, pressure relief, vibration protection | Phase sequence, pressure relief, vibration protection | Soft start protection, phase sequence, pressure relief, vibration protection |
24 | Filter consumption: | nothing | ||
25 | Sheet metal material: | 304 stainless steel | ||
26 | Upper seal: | High purity silicon carbide material | High purity silicon carbide material | Hard alloy YN8 |
27 | Separation structure: | Double helix (including disc) | ||
28 | Material of drain valve: | / | Imported alloy aluminum | Imported alloy aluminum |
29 | Material of separation cylinder: |
| Imported alloy aluminum | Imported alloy aluminum |
30 | Lower seal: | High purity silicon carbide material | Hard alloy YN8 | Hard alloy YN8 |
31 | Main component accuracy: | ≤ 0.01mm | ||
32 | Dynamic balance treatment | have | ||
33 | electrical machinery | ABB imported motor | ||
34 | Liquid level control switch | Imported Jiemai | ||
35 | Pressure switch | Imported Jiemai | ||
36 | Electrical part | Schneider/Chint/Otonix | ||
Basic principle of centrifugal oil filter
Separation through different densities of gas, oil, water, and impurities
Automatic continuous drainage function
Currently imported purification equipment in China

Purification effect

lubricating oil

46 # Anti wear hydraulic oil

Water ethylene glycol
Filtered impurities

Separation of impurities on the inner wall of the drum (before cleaning)Separation of impurities on the inner wall of the drum (after cleaning)

The first cleaning of impurities in the separation bucketThe second cleaning of impurities in the separation bucket

The oil sludge scraped out by the scraperEmulsion adheres to the inner wall of the separation drum
E-mail:MFR_2019@163.com
Address:Building 16, Lithium Battery New Energy Industrial Park, Industrial Avenue, Binjiang Town, Yuanzhou District, Yichun City, Jiangxi Province
